D-Link EasySmart Switch User Manual
Select the event message(s) to be sent out to the managing station.
System Event:
The system level messages contain:
Device Bootup -
System boot-up information
Illegal Login -
Events of incorrect password logins and records the IP of the source PC
Twisted pair Port Link Up/Link Down:
Copper port connection information
Firmware Upgrade State:
Information of firmware upgrade - success or failure
System > Password Access Control
Setting a password is a critical tool for managers to secure the EasySmart Switch. After entering the old
password and the new password two times, click
Apply
for the changes to take effect.
Figure 39 – System > Password Access Control
L2 Features > Port Trunking
The Trunking function allows the switch to combine two or four ports together to increase bandwidth.
Select the
Trunking Groups
, choose the
Members
to be grouped together, and then click
Apply
to
activate the selected
Trunking Groups
. Up to eight Trunking Groups may be created, each
supporting up to four ports.
Disable -
Removes all the members in this trunk group.
Figure 40- L2 Features > Port Trunking Settings
L2 Features > IGMP Snooping
With Internet Group Management Protocol (IGMP) snooping, the EasySmart Switch can make intelligent
multicast forwarding decisions by examining the contents of each frame’s Layer 2 MAC header.
By default, IGMP is disabled. If enabled, the EasySmart switch can recognize IGMP queries and reports sent
between network stations or devices and an IGMP host. With IGMP snooping enabled, the EasySmart switch
will forward multicast traffic only to the connections that have members attached.
22
Summary of Contents for EasySmart DGS-1100-24
Page 1: ...Ver 1 00 ...
Page 36: ...D Link EasySmart Switch User Manual Figure 57 Security Dynamic Forwarding Table 33 ...
Page 40: ......
