D-Link DWR-730 User Manual Download

Page: 9 / 93

D-Link DWR-730 User Manual

Section 1 - Product Overview

Wi-Fi & Clients

Number

Indicates the number of clients currently connected to the

device by Wi-Fi.

Internet Connection

Status

Internet

If this icon is displayed, there is a connection to the Internet.

SMS

Number

There are unread SMS messages in the inbox.

Battery Status

Empty-Full

Displays the current battery level. If charging, an animation will

indicate charging status and current battery level.

Wi-Fi Protected Setup WPS

The device is ready for WPS association with wireless clients.

Connection Method

The device is set to connect to the mobile network

automatically.

The device is set to connect to the mobile network manually.

D = On Demand

The device will connect to the preferred mobile network when

Internet access is required.

Operator

Name

The name of the mobile network operator to which device is

currently connected.

Roaming

The device is currently roaming on a network other than the

home network.

Summary of Contents for DWR-730






























































































Search results

Summary of Contents for DWR-730

Reviews:

Related manuals for DWR-730

Brands by name

Popular brands

D-Link DWR-730, User Manual

Search results

Summary of Contents for DWR-730

Reviews:

Related manuals for DWR-730

Brands by name

Popular brands