23
D-Link DWR-730 User Manual
Section 3 - Configuration
DHCP
DHCP Server
Select
None
from the drop-down menu if you do not wish
to enable the DHCP Server. Select
Server
to specify a DHCP
server, and enter the information in the fields below.
Set the starting address of the IP range.
Set the ending address of the IP range.
Set the lease time of the IP addresses issued by the DHCP
server.
Click
Apply
to save the current configuration.
DNS Server
Select
None
from the drop-down menus if you do not wish to
specify a first, second, or third DNS server. Select
User Define
to specify a DNS server, and enter the address of the server in
the field provided.
Click
Apply
to save the current configuration.
DHCP Mode:
Start IP:
End IP:
Lease Time:
First/Second/
Third DNS
Server:
The DWR-730 has a built-in DHCP server which can assign IP addresses to connected clients. This section allows you to configure the DHCP
settings.
