22
D-Link DWR-730 User Manual
Section 3 - Configuration
Network
The
Network
pages allow you to check the current status of your Local Area Network (LAN), and make changes to LAN settings.
This section allows you to configure the IP settings for your wireless network.
Wi-Fi
IPv4
Enter the IPv4 address for your Wi-Fi network. If you change
this address, you will need to enter the new address in your
web browser’s address bar in order to access the web-based
configuration utility.
Enter the IPv4 subnet mask for your Wi-Fi network.
Click
Apply
to save the current configuration.
IPv6
Enter the IPv6 address for your Wi-Fi network.
Enter the prefix to be used to delegate IPv6 addresses to the
LAN.
Check the box to set the router announcement mode to
autonomous.
Check the box to enable router announcement on-link
Click
Apply
to save the current configuration.
DNS Name
Enter your router’s DNS device name in the field provided.
Click
Apply
to save the current configuration.
IP Address:
IP Subnet Mask:
IPv6 Address:
Prefix for LAN:
RA Autonomous:
RA On-Link:
DNS Device Name:
