D-Link DSN-3400, User Manual

Page: 44 / 137

34 Chapter 3 Managing Volumes
Figure 3-10. Grant Access Screen
The resulting volume capacity may be slightly smaller than the size
specified, depending on the type of volume and the number of drives used.
6. By default, all iSCSI initiators will have access to the volume you create. If you
prefer, you can grant access to one or more iSCSI initiators listed in the screen,
grant access to an initiator not in the list, or not grant access to an initiator at this
time. If you decide to select multiple iSCSI initiators from the list, you can use the
following shortcuts:
–
For adjacent iSCSI initiators, click the first one, then hold down the Shift key
and click the last one. The first and last initiators, and all the initiators
between them, get selected.
–
For non-adjacent initiators, click the first one, then hold down the Ctrl key and
click each subsequent initiator.
–
To deselect an initiator, hold down the Ctrl key and click an initiator that is
selected.
7. Click Next.
The Ready to Create Volume screen appears (see Figure 3-11).
If you decide not to grant access to an initiator now, you can do so at a later
time (see section 3.3.1).