D-Link DSL-562T User Manual Download Page 27

Page: 27 / 89

DSL-562T ADSL Router User

’

s Guide

Your computer is now ready to use the Router

’

s DHCP server.

Windows ME

First, check for the IP protocol and, if necessary, install it:

1. In the

Windows

task bar, click the

Star

t button, point to

Settings

, and then click

Control Panel

2. Double-click the

Network and Dial-up Connections

icon.

3. In the

Network and Dial-up Connections

window, right-click the

Network

icon, and then select

Properties

4. The

Network Properties

dialog box displays with a list of currently installed network components. If

the list includes Internet Protocol (TCP/IP), then the protocol has already been enabled. Skip ahead to

Configure Windows ME for DHCP

5. If Internet Protocol (TCP/IP) does not display as an installed component, click

Add

6. In the

Select Network Component Type

dialog box, select

Protocol

, and then click

Add

7. Select

Microsoft

in the Manufacturers box.

8. Select

Internet Protocol (TCP/IP)

in the Network Protocols list, and then click

9. You may be prompted to install files from your Windows Me installation CD or other media. Follow

the instructions to install the files.

10. If prompted, click

to restart your computer with the new settings.

Configure Windows ME for DHCP

1. In the

Control Panel

, double-click the

Network and Dial-up Connections

icon.

2. In the

Network and Dial-up Connections

window, right-click the

Network

icon, and then select

Properties

3. In the

Network Properties

dialog box, select

TCP/IP

, and then click

Properties

4. In the

TCP/IP Settings

dialog box, click the

Obtain and IP address automatically

option.

5. Double-click

twice to confirm and save your changes, and then close the Control Panel.

Your computer is now ready to use the Router

’

s DHCP server.

Windows 95 and Windows 98

First, check for the IP protocol and, if necessary, install it:

1. In the

Windows

task bar, click the

Start

button, point to

Settings

, and then click

Control Panel

Double-click the

Network

icon.

2. The

Network

dialog box displays with a list of currently installed network components. If the list

includes TCP/IP, and then the protocol has already been enabled, skip to

Configure IP Information

Windows 95, 98

3. If TCP/IP does not display as an installed component, click

Add

. The

Select Network Component

Type

dialog box displays.

4. Select

Protocol

, and then click

Add

. The

Select Network Protocol

dialog box displays.

5. Click on

Microsoft

in the Manufacturers list box, and then click

TCP/IP

in the Network Protocols list

box.

6. Click

to return to the Network dialog box, and then click

again. You may be prompted to

install files from your Windows 95/98 installation CD. Follow the instructions to install the files.

7. Click

to restart the PC and complete the TCP/IP installation.

Summary of Contents for DSL-562T


























































































Search results

Summary of Contents for DSL-562T

Reviews:

Related manuals for DSL-562T

Brands by name

Popular brands

D-Link DSL-562T, User Manual

Search results

Summary of Contents for DSL-562T

Reviews:

Related manuals for DSL-562T

Brands by name

Popular brands