DSL-562T ADSL Router User
’
s Guide
42
Access Control pre-configured rules are the same as for port forwarding:
Category
Available Rules
Games:
Alien vs. Predator, Asheron
’
s Call, Dark Rein, Delta Force, Doom, Dune, DirectX
Games, EliteForce, EverQuest, Fighter Ace II, Half Life, Heretic II, Hexen II, Kali,
Motorhead, MSN Gaming Zone, Myth: The Fallen Lords, Need for Speed Porsche,
Need for Speed 3, Outlaws, Rainbow 6, Starcraft, Tiberian Sun, Ultima, Unreal
Tournament.
VPN
IPSec, PPPTP
Audio/Video
Net2Phone, Netmeeting, QuickTime
Applications
VNC, Win2k Terminal, PC Anywhere, Netbios, RemoteAnything, Radmin, LapLink,
CorbonCopy, Gnutella.
Servers
Quake 2, Quake 3, Unreal, Web, FTP, Telnet, DNS, LDAP, NNTP, SMTp, POP 2,
POP3, IMAP, IRC, Lotus, Remote.
User
Use this to set up custom TCP/UDP port rules.
To configure a new Access Control rule for any of the pre-configured rules, follow these steps:
1. Select a
LAN IP
from the available client IP addresses listed in the pull-down menu; or, create a
New
IP
by clicking the button. This brings up the LAN Client menu (see above).
2. Select the
Category
of the rule you are creating. The
Available Rules
for the category appear listed.
3. Highlight to select the Available Rule you want to apply.
4. Click on the
Add>
button to place the rule in the
Applied Rules
list of port forwarding that are actively
applied to the client
The Available Rules can be applied to a single client IP address. That is, it is not possible to use an applied rule
for multiple IP addresses on the LAN.
To set up custom TCP or UDP access control rules, follow these steps:
1. Select the User category and click the
Add
button located below the Available Rules list.
2. In the new menu that appears, type a
Rule Name
in the space provided.
3. Select the port
Protocol
from the pull-down menu - you may select
TCP
,
UDP
or both (
TCP/UDP
).
4. Configure a range of ports. Type the lowest numbered port in the range in the
Port Start
space. Type
the highest numbered port in the
Port End
space. For a single port, just enter the same number in both
spaces.
5. Type a number for the
Port Map
in the space provided. This is the local port being forwarded to.
6. Click the
Apply
button to create the new rule. The new rule will appear listed in the table of custom
port control rules.
Summary of Contents for DSL-562T
Page 1: ...DSL 562T ADSLRouter User s Manual First Edition April 2004 651D562T 025 ...
Page 14: ......
Page 84: ......
Page 89: ......
