![background image](http://html.mh-extra.com/html/d-link/dsl-562t/dsl-562t_user-manual_74517041.webp)
DSL-562T ADSL Router User
’
s Guide
27
New Connection Example 1 - Create a New PPPoE Connection
The example below describes how to set up a new connection that uses a PPPoE type WAN conneciton. To
create a new connection:
1. Click on the
New Connection
button.
2. Configure the Router for the
Type:
of conneciton used and all the remaining settings as discussed in the
preceding section. In this example, the type of connection used for
Connection 2
is
PPPoE
. Notice also
the the VPI and VCI values have been changed.
3. Click the
Apply
button to cerate the new connection. Notice that a new menu button is created
(Connection 2), this links to the configuration menu for Connection 2 (see example below). If at any
time you want to change, delete, disconnect or connect this WAN connection, click on the Connection 2
button and make the changes in the Connection 2 menu.
4. Now save the changes you just made. Click the
Tools
tab and then click on the
System Commands
button. Click on the
Save All
button to store the configuration settings. Click on
Back
button to return
to the System Commands menu.
Figure 3- 11. Setup a New Connection
–
Connection 2
Note
Remember to save new configuration settings using the
Save All
button when you have
made all the intended changes. Go to
Tools
à
System Commands
à
Save All
.
Summary of Contents for DSL-562T
Page 1: ...DSL 562T ADSLRouter User s Manual First Edition April 2004 651D562T 025 ...
Page 14: ......
Page 84: ......
Page 89: ......