DSL-562T ADSL Router User
’
s Guide
24
7. The
Encapsulation
values LLC (SNAP) and VC (MUX) are two different methods of encapsulating
the PPP packet. Contact your ISP to make sure which encapsulation is being supported.
8. Based on the information provided by your ISP, enter the
IP Address
, Subnet
Mask
,
Default Gateway
(if provided), and Domain Name Services (
DNS
) values (if provided).
9. Select the desired
Mode
,
Bridged
or
Routed
.
10. Click the
Apply
button when you have entered all the information. The web browser will briefly go
blank. You are now finished changing setting for the primary WAN connection known as Connection 1.
It is now necessary to save the changes you just made and restart the Router.
11. To save the changes made to Connection 1, click the
Tools
tab and then click on the
System
Commands
button. Click on the
Save All
button to store the configuration settings. Click on
Back
button to return to the System Commands menu.
12. Check the WAN connection status. Click the
Status
tab and then the
Connection Status
button. Look
under
WAN
to view the
State
of Connection 1, it should read
Connected
. If the WAN connection state
does not appear to
Connected
after a few minutes, go back to the Connection 1 Setup menu, check the
settings and make sure they are correct.
Configure Connection 1 for DHCP for WAN
Dynamic Host Configuration Protocol (DHCP) allows the gateway to automatically obtain the IP address from a
DHCP server on the service provider
’
s network. The service provider assigns a global IP address from a pool of
addresses available to the service provider. Typically the IP address assigned has a long lease time, so it will
likely be the same address each time the Router requests an IP address.
Figure 3-9. Setup
–
Configure Connection 1 for DHCP service for the WAN
To configure the WAN connection for DHCP, perform the steps listed below. Some of the settings do not need
to be changed the first time the device is set up, but can be changed later if you choose.
1. Click the
Connection 1
button under
WAN Setup
to view the default
PPPoA Connection Setup
configuration menu.
Summary of Contents for DSL-562T
Page 1: ...DSL 562T ADSLRouter User s Manual First Edition April 2004 651D562T 025 ...
Page 14: ......
Page 84: ......
Page 89: ......
