DSL-2750U
Wireless ADSL2+ Router with 3G/LTE/Ethernet WAN Support
and USB Port
User Manual
Configuring via Web-based Interface
In some cases NTP servers addresses are provided by your ISP. In this case, you need to move the
Get NTP server addresses using DHCP
switch in the
NTP Servers
section to the right and
click the
APPLY
button. Contact your ISP to clarify if this setting needs to be enabled. If the
Get
NTP server addresses using DHCP
switch is moved to the right, the
NTP Servers
section is
not displayed.
To allow connected devices to use the IP address of the router in the local subnet as a time server,
move the
Run as a server for the local network
switch to the right and click the
APPLY
button.
!
When the router is powered off or rebooted, the system time is reset to the default value.
If you have set automatic synchronization for the system time, the internal clock of the
device will be configured after connecting to the Inter
net. If you have set the system time
manually, you need to set the time and date again (see above).
Page
201
of 210