DSL-2750U
Wireless ADSL2+ Router with 3G/LTE/Ethernet WAN Support
and USB Port
User Manual
Configuring via Web-based Interface
Connections Setup
In this menu you can configure basic parameters of the router's local area network and configure
connection to the Internet (a WAN connection).
WAN
On the
Connections Setup
/ WAN
page, you can create and edit connections used by the router.
By default, an ADSL connection of the
Dynamic IP
type is configured in the system. It is assigned
to the DSL port of the router.
!
Please reboot the router after creating, editing, or removing an ADSL WAN connection.
!
Prior to creating an Ethernet WAN connection, specify a LAN port that will be used as the
WAN port (see the
WAN Remapping
section, page
159
).
Figure 48. The
Connections Setup / WAN
page. The simplified mode.
To edit an existing connection, click the
EDIT
button. On the opened page, on the
Basic
tab, the
mandatory settings of this WAN connection will be displayed. To view all available settings of the
WAN connection, go to the
All Settings
tab. Change the needed parameters and click the
APPLY
button.
To disconnect a connection and establish it again, click the
RECONNECT
button.
To remove an existing connection and create a new one, click the
CHANGE CONFIGURATION
button. Upon that the connection creation page opens.
To create several WAN connections, go to the advanced mode. To do this, click the
ADVANCED
MODE
button.
!
When connections of some types are created,
the
Connections Setup
/ WAN
page
is
automatically displayed in the advanced mode.
Page
64
of 210
