DSL-2750U
Wireless ADSL2+ Router with 3G/LTE/Ethernet WAN Support
and USB Port
User Manual
Configuring via Web-based Interface
In the
Security Settings
section, you can change security settings of the wireless network.
By default, the
WPA2-PSK
network authentication type of the wireless network is specified. WPS
PIN from the barcode label is used as the network key.
Figure 95. Network authentication types supported by the router.
The router supports the following authentication types:
Authentication type
Description
Open
Open authentication (with WEP encryption for wireless network
modes not supporting 802.11n devices).
WEP-64
Authentication with a 64-bit shared key with WEP encryption. This
authentication type is not available when a mode supporting 802.11n
devices is selected from the
Wireless mode
drop-down list on the
Wi-Fi / Basic Settings
page.
WEP-128
Authentication with a 128-bit shared key with WEP encryption. This
authentication type is not available when a mode supporting 802.11n
devices is selected from the
Wireless mode
drop-down list on the
Wi-Fi / Basic Settings
page.
WPA
WPA-based authentication using a RADIUS server.
WPA-PSK
WPA-based authentication using a PSK.
WPA2
WPA2-based authentication using a RADIUS server.
WPA2-PSK
WPA2-based authentication using a PSK.
WPA/WPA2 mixed
A mixed type of authentication. When this value is selected, devices
using the
WPA
authentication type and devices using the
WPA2
authentication type can connect to the wireless network.
Page
121
of 210