D-Link DSL-2750U User Manual Download Page 38

Page: 38 / 210

DSL-2750U

Wireless ADSL2+ Router with 3G/LTE/Ethernet WAN Support

and USB Port

User Manual

Configuring via Web-based Interface

You can finish the wizard earlier and go to the menu of the web-based interface. To do this, click the

ADVANCED SETTINGS

button. On the opened page, change the default settings: specify the

administrator password in the

Admin password

field and the name of the wireless network in the

Network name (SSID)

field. Then click the

APPLY

button.

Figure 24. Changing the default settings.

To continue the configuration of the router via the Wizard, click the

CONTINUE

button.

Page

of 210

Summary of Contents for DSL-2750U



















































































































































































































Search results

Summary of Contents for DSL-2750U

Reviews:

Related manuals for DSL-2750U

Brands by name

Popular brands

D-Link DSL-2750U, User Manual

Search results

Summary of Contents for DSL-2750U

Reviews:

Related manuals for DSL-2750U

Brands by name

Popular brands