D-Link DSL-2750U User Manual Download Page 17

Page: 17 / 210

DSL-2750U

Wireless ADSL2+ Router with 3G/LTE/Ethernet WAN Support

and USB Port

User Manual

Installation and Connection

Connecting to PC

PC with Ethernet Adapter

1. Make sure that your PC is powered off.

2. Connect an Ethernet cable between any of four Ethernet ports located on the back panel of

the router and the Ethernet port of your PC.

To connect via USB modem:

connect your USB modem to the USB port

located on the

back panel of the router.

In some cases you will need to reboot the router after connection of the USB modem.

To connect the router to a DSL line:

connect a phone cable between the DSL port of the

router and the

ADSL OUT

port of the splitter. Connect your phone to the

PHONE

port of

the splitter. Then connect another phone cable between a phone jack and the

ADSL IN

port

of the splitter.

To connect the router to an Ethernet line:

run the Initial Configuration Wizard and select

the router's LAN port that will be used as the WAN port. Then connect the Ethernet cable
between the selected Ethernet port located on the back panel of the router and the Ethernet
line.

6. Connect the power cord to the power connector port on the back panel of the router, then

plug the power adapter into an electrical outlet or power strip.

7. Turn on the router by pressing the

ON/OFF

button on its back panel.

8. Turn on your PC and wait until your operating system is completely loaded.

5 It is recommended to use a USB extension cable to connect a USB modem to the router.

Page

of 210

Summary of Contents for DSL-2750U



















































































































































































































Search results

Summary of Contents for DSL-2750U

Reviews:

Related manuals for DSL-2750U

Brands by name

Popular brands

D-Link DSL-2750U, User Manual

Search results

Summary of Contents for DSL-2750U

Reviews:

Related manuals for DSL-2750U

Brands by name

Popular brands