Introduction to DRO-250i
DRO-250i User Manual
87
System Location:
The physical location of the device is specified here. It
should be of type STRING. The value here specifies
the current location of the device where it is placed.
Example: Second Floor.
User Name:
User name should be of STRING type and it should be
Unique. User Name specified with SNMPv3 configuration is used for
authentication also. No two users should have the same name.
Example: John Roberts.
SNMP Version:
User can select any of the three versions
SNMPv1,SNMPv2c and SNMPv3.
Access Rights:
To browse the MIBs, access rights are provided to the
COMMUNITY. A community can have READ or WRITE access.
READ Community:
This defines the COMMUNITY STRING for which
the READ access is given.
WRITE Community:
This defines the COMMUNITY STRING for
which the WRITE access is provided. The WRITE community has both
READ as well as WRITE permissions.
READ and WRITE community strings are used for authentication with
SNMPv1 or SNMPv2 only.
SNMPv3 Settings:
Security Level:
SNMPv3 provides three types of security levels to its
users which are follows:
NoAuthNoPriv-
Uses a username string for authentication.
AuthNoPriv
–
Provides authentication based on HMAC-MD5 or
HMAC-SHA algorithms.
AuthPriv
– Adds DES 56- bit encryption in addition to authentication
based on HMAC-MD5 or HMAC-SHA.
