DRO-210i Web Configuration
DRO-210i User Manual Page 3-19
Policies will be applied on that interface, if the security type is set to
Un-
Trusted
t h e n
Inbound
Policies will be applied on that interface.
Note:
If more than one interface is of same security type then Policy
database for them is same i.e. if WAN1 and WAN2 are configured as Un-
Trusted then both of them will share a common
Inbound
Policies
database.
If user configures LAN as Un-trusted, then user needs to configure
Remote Access for getting the web-configuration. So before configuring
LAN as Untrusted, user should enter the IP of the LAN PC (which is
configuring the DRO-210i) in the Remote access configuration web-page.
Policy (Scheduler) Rules
The Router allows user to specify different policies for different times. A
policy is active for certain period of time according to the configuration.
Rules that are added for a policy take effect only when corresponding
policy is active.
System Date Time -
The current system time is shown here. This can be
set from the “Time” webpage as per the time zone.
Policy Name –
Alphanumeric name representing the Policy. All the
policies should have a unique name.
Schedule -
Allows user to choose Policy type Always or One-Time
Scheduling can be done in two ways
1.
Always
- This Policy is always active until another
Always
policy is
added or
One Time
Policy becomes active.
2.
One-Time
- This Policy is active for certain configured period and
becomes inactive once the period expires.
Start Time
– Configure the time from which onwards the Policy
becomes active. The format of time is Month: Day: Hr: Min. This field
is applicable for One-Time Policy only.
