DRO-210i Web Configuration
DRO-210i User Manual Page 3-18
If more than one interface is of same security type then Policy database for
them is same i.e if WAN1 and WAN2 are configured as Un-Trusted then both of
them will share a common Inbound Policies database
.
If user configures LAN as Un-trusted, then user needs to configure Remote
Access for getting the web-configuration. So before configuring LAN as Untrusted,
user should enter the IP of the LAN PC (which is configuring the DRO-210i) in
the Remote access configuration web-page.
3.3.2
Firewall - Policy
Click on
Firewall > Policy
to get the web page as shown below:
Firewall Enabled:
Firewall will be active only when this flag is selected;
when this flag is not selected firewall is disabled on all Interfaces.
Status:
Firewall can be enabled/disabled on a particular Interface with this
field.
Security Type:
Interfaces can be set to either Trusted or Un-Trusted type
with this field. If the security type is set to
Trusted
t h e n
Outbound
