DPN-144DG
GPON ONT Dual Band Wireless AC1200
VoIP Gateway with 1 GPON Port, 4 10/100/1000Base-T
Ports, 2 FXS Ports, and 1 USB Port
User Manual
Configuring via Web-based Interface
Parameter
Description
Fax/Modem
determination
From the drop-down list, select a mode of fax/modem signal
detection.
Enable custom
parameters
Move the switch to the right to specify additional parameters for
T.38. Upon that the
Custom parameters T.38
section is displayed
on the page.
Custom parameters T.38
Maximal buffer
The maximum buffer size for data received by the gateway.
Rate management
From the drop-down list, select a method for facsimile data transfer
rate management:
Local
or
Remote
.
Maximal rate
From the drop-down list, select the maximum rate for facsimile data
receipt/transfer.
Error correction mode
Move the switch to the right to enable the error correction mode.
When the switch is moved to the right, the
ECC signal
and
ECC
data
fields are available for editing.
Enable spoofing
Move the switch to the right to let the gateway simulate facsimile
data receipt/transfer in case of delays.
Duplicate number
Specify number of packet duplications.
V.152
Enable V.152 support
Move the switch to the right to allow support of the V.152
recommendation. Upon that the
Payload type
field and the
Codec type
drop-down list are displayed on the page.
Payload type
Payload data type in accordance with RFC2833.
Codec type
From the drop-down list, select a codec for data transfer
in
accordance with
V.152.
When all needed settings are configured, click the
APPLY
button.
Page
173
of 217
