DPN-144DG
GPON ONT Dual Band Wireless AC1200
VoIP Gateway with 1 GPON Port, 4 10/100/1000Base-T
Ports, 2 FXS Ports, and 1 USB Port
User Manual
Configuring via Web-based Interface
To use a number specified in the
Abbreviated Dial
section, dial the needed short number on the
phone set.
In the
Dialplan Settings
section, you can configure the dial plan for VoIP. To do this, move the
Use dialplan
switch to the right and in the
Dialplan
field displayed, specify the needed rule. You
can specify several rules separated by the character
|
(vertical bar). You can use digits (0-9), the
characters * (asterisk) and # (pound), and the following characters:
Parameter
Description
[]
Digits and/or the characters * and # within square brackets specify a
range of values for a certain position in the number.
X
Any digit, the character * or #.
.
Any number of repetitions (including none) of the previous digit or
character.
<>
Angle brackets containing digits separated by : (colon) allow to
substitute the digit after the colon for the digit before the colon.
In the
Misc
section, fill in the
PIN code to dial
field to allow the user of the phone to make calls
only after dialing the PIN code.
When all needed settings are configured, click the
APPLY
button.
Page
178
of 217
