DPN-144DG
GPON ONT Dual Band Wireless AC1200
VoIP Gateway with 1 GPON Port, 4 10/100/1000Base-T
Ports, 2 FXS Ports, and 1 USB Port
User Manual
Configuring via Web-based Interface
Connections Setup
In this menu you can configure basic parameters of the gateway's local area network and configure
connection to the Internet (a WAN connection).
WAN
!
When the gateway connects to a fiber optic line, a WAN connection is created and
configured automatically.
When the gateway connects to an Ethernet line or a mobile network, you should configure
your Ethernet WAN connection
in accordance with data provided by your Internet service
provider (ISP). Make sure that you have obtained all necessary information prior to
configuring your connection. Otherwise contact your ISP.
On the
Connections Setup
/ WAN
page, you can create and edit connections used by the
gateway.
Figure 33. The
Connections Setup / WAN
page.
To create a new connection, click the
Add
button in the
Connections List
section. On the opened
page, specify relevant parameters.
To edit an existing connection, in the
Connections List
section, left-click the relevant line in the
table. On the opened page, change the parameters and click the
APPLY
button.
To disconnect a connection and establish it again, select the checkbox located to the left of the
relevant line in the table and click the
Reconnect
button.
On the
Basic
tab, mandatory settings of a WAN connection are displayed. To view all available
settings of the needed WAN connection, go to the
All Settings
tab.
To remove a connection, in the
Connections List
section, select the checkbox located to the left
of the relevant line in the table and click the
Delete
button. Also you can remove a connection on
the editing page.
To allow multicast traffic (e.g. streaming video) for a connection, in the
IGMP
section, select the
choice of the radio button which corresponds to this connection (only for connections of the
Dynamic IPv4 or Static IPv4 type).
Page
48
of 217
