DPN-144DG
GPON ONT Dual Band Wireless AC1200
VoIP Gateway with 1 GPON Port, 4 10/100/1000Base-T
Ports, 2 FXS Ports, and 1 USB Port
User Manual
Configuring via Web-based Interface
In the
Static DHCP
section, you can specify MAC address and IP address pairs (set a fixed IPv4
address in the local area network for a device with a certain MAC address). The gateway assigns IP
addresses in accordance with the specified pairs only when the DHCP server is enabled (in the
DHCP
section, the
Server
value is selected from the
Mode
drop-down list).
Figure 65. The section for creating MAC-IP pairs.
To create a MAC-IP pair, click the
ADD
button. In the opened window, in the
IP address
field,
enter an IPv4 address which will be assigned to the device from the LAN, then in the
MAC
address
field, enter the MAC address of this device. In the
Host
field, specify a network name of
the device for easier identification (
optional
). Click the
APPLY
button.
Also you can create a MAC-IP pair for a device connected to the gateway's LAN at the moment. To
do this, click the
CLIENTS LIST
button. In the opened window, select the relevant device and
click the
OK
button. To view the latest list of the connected devices, click the
REFRESH
button.
To edit the settings for the existing MAC-IP pair, left-click the relevant line in the table. In the
opened window, change the needed parameters and click the
APPLY
button.
To remove a MAC-IP pair, select the checkbox located to the left of the relevant line in the table
and click the
Delete
button. Then click the
APPLY
button. Also you can remove a MAC-IP pair in
the editing window.
Page
84
of 217
