D-Link DPN-144DG User Manual Download Page 118

Page: 118 / 217

DPN-144DG

GPON ONT Dual Band Wireless AC1200

VoIP Gateway with 1 GPON Port, 4 10/100/1000Base-T
Ports, 2 FXS Ports, and 1 USB Port

User Manual

Configuring via Web-based Interface

FTP

On the

USB Storage / FTP

page, you can enable the built-in FTP server of the gateway to

provide access to the USB storage for users of your LAN.

Figure 88. The

USB Storage / FTP

page.

To enable the FTP server, move the

Enable FTP server

switch to the right.

Move the

Anonymous login

switch to the right to allow anonymous access to the content of the

USB storage for users of your LAN. If you want to provide authorized access to the content of the
USB storage for users of your LAN,

move the switch to the left

. After applying the parameters on

this page, go to the

USB Storage / USB Users

page and create needed accounts.

If needed, change the gateway's port used by the FTP server in the

Port

field (by default, the

standard port

is specified).

After specifying the needed parameters, click the

APPLY

button.

To disable the built-in FTP server of the gateway, move the

Enable FTP server

switch to the left

and click the

APPLY

button.

Page

118

of 217

Summary of Contents for DPN-144DG


























































































































































































































Search results

Summary of Contents for DPN-144DG

Reviews:

Related manuals for DPN-144DG

Brands by name

Popular brands

D-Link DPN-144DG, User Manual

Search results

Summary of Contents for DPN-144DG

Reviews:

Related manuals for DPN-144DG

Brands by name

Popular brands