D-Link DPN-144DG User Manual Download Page 153

Page: 153 / 217

DPN-144DG

GPON ONT Dual Band Wireless AC1200

VoIP Gateway with 1 GPON Port, 4 10/100/1000Base-T
Ports, 2 FXS Ports, and 1 USB Port

User Manual

Configuring via Web-based Interface

The following elements are available on the page:

Parameter

Description

IGMP

Select a version of IGMP from the drop-down list. Such a setting
allows to enable multicasting from the WAN connection selected in
the

IGMP

section on the

Connections Setup / WAN

page.

SIP

Move the switch to the right to enable SIP. Such a setting allows
using the SIP ALG function. This function allows VoIP traffic to
pass through the NAT-enabled gateway.

RTSP

Move the switch to the right to enable RTSP. Such a setting allows
managing media stream: fast forward streaming audio/video, pause
and start it.

PPPoE pass through

Move the switch to the right

to enable the PPPoE pass through

function.

IPsec pass through

Move the switch to the right

to enable the IPsec pass through

function.

L2TP pass through

Move the switch to the right

to enable the L2TP pass through

function.

PPTP pass through

Move the switch to the right

to enable the PPTP pass through

function.

After specifying the needed parameters, click the

APPLY

button.

16 On the

Connections Setup / WAN

page, create a WAN connection, move the

SIP

switch to the right on the

Advanced / IGMP/ALG/Passthrough

page, connect an Ethernet cable between a LAN port of the gateway and

the IP phone. Specify SIP parameters on the IP phone and configure it to obtain an IP address automatically (as
DHCP client).

Page

153

of 217

Summary of Contents for DPN-144DG


























































































































































































































Search results

Summary of Contents for DPN-144DG

Reviews:

Related manuals for DPN-144DG

Brands by name

Popular brands

D-Link DPN-144DG, User Manual

Search results

Summary of Contents for DPN-144DG

Reviews:

Related manuals for DPN-144DG

Brands by name

Popular brands