D-Link DMF-560TX, User Manual

Page: 42 / 52

4 QUESTIONS AND ANSWERS
5-8
in upper memory (C000:0 -- EFFF:F) for attribute
memory of PCMCIA card during enabling the
card.
Example:Device=C:\DOS\EMM386.EXE RAM
X=D000-D3FF.
Reserve D000 - D3FF for attribute memory.
C:No free I/O space or interrupt request can be
assigned to the PCMCIA card.
A:The LAN/Modem card needs 32 contiguous I/O
ports and one interrupt request for LAN. It also
need 8 contiguous I/O ports and another interrupt
request for 56K Fax/Modem. The LAN ports have
to be located at one of the following I/O space.
0x300, 0x320, 0x340, 0x360. The 56K
Fax/Modem ports have to be located at one of the
0x2F8, 0x3E8, 0x3E8. Besides for the
compatibility consideration with some of the 56K
Fax/Modem applications. The Modem interrupt
(MIR) is recommended to be assigned at value less
than 7 (IRQ3 to 6). Make sure that the resources
are available for the LAN/Modem card.
Q:How can I know the LAN/Modem card has
been enabled or not ?
A:If the Card Service is installed, you can check by
hearing the beep when card insertion.
A:Run CARDEN /CHK to check, if the card has
been enabled. The resources allocated for the card
are shown as below at the last line of display
message.
“
IOP=0Xnnn IRQ=nn COM=nn MIR=nn
”