D-Link DMF-560TX, User Manual

Page: 32 / 52

4 DRIVERS INFORMATION
4-6
with [LMNDIS_NIF] . The valid entries in the file
are listed below:
[LMNDIS_NIF]
DRIVERNAME - LMNDIS$
This line must always be presend
IOADDRESS - value
where value is one of the following address:
0x300, 0x320, 0x340, 0x360.
The leading 0x for the hex notation is required.
To have Card Services select the address base from
it's pool of
available address then use a value of 0.
INTERRUPT - value
where values is one of the following interrupts:
3, 4, 5, 7, 9, 10, 11, 12, 15.
To have Card Services select an available interrupt
resource then place a value of 0 at this location.
4.2. Notes for Packet Driver
The following are examples of CONFIG.SYS file for
loading System Soft Card Services and packet
driver:
Examples of partial CONFIG.SYS file:
device=c:\cardsoft\ss365sl.exe
device=c:\cardsoft\cs.exe
device=c:\cardsoft\csalloc.exe c:\cardsoft\csalloc.ini
device=c:\tcpip\carden.exe /iop=nnn /irq=n /com=n /mir=n
device=c:\cardsoft\cardid.exe
device=c:\tcpip\lmpd.com