D-Link DMF-560TX, User Manual

Page: 21 / 52

2 INSTALLATION
2-15
Windows NT will load network and grant
configurations for
-NWLink
-TCP/IP
-Netbeui
Typically the configurations are unique for
each network. Ask your network administrator
for help if you want to change them.
16. Once all network softwares are well loaded,
press
OK . The configuration and bindings for the PC
Card might be confirmed. Answer the questions
accordingly.
17. Connect to your network using the provided
10/100 Fast Ethernet RJ-45 jack.
18. Reboot the system.
Getting Start for Windows NT4.0
1. Remove all existing PC Cards from the system.
2. Run Windows NT 4.0
3. Login with a full access level i.e.
ADMINISTRATOR
4. Remove all existing network support from
MY COMPUTER
à
CONTROL PANEL
à
NETWORK
à
ADAPTERS
5. Press CLOSE after all network components are
removed.
6. Remove all serial port devices in
MY COMPUTER
à
CONTROL PANEL
à
PORTS
7. Press CLOSE after all serial port devices are
removed.