D-Link DMF-560TX, User Manual

Page: 37 / 52

4 QUESTIONS AND ANSWERS
5-3
Q:The software does not control the modem
properly or can not detect the modem.
A:Make sure the software has been set up correctly.
Check the initialization and dial strings.
C:Some TSRs (programs that stay in memory after
they are loaded) may conflict with the
communications software.
A:Try starting your computer without loading any
TSRs.
Q:The characters on the screen are doubled.
C:Both the modem and the software have the echo
feature turned on.
A:Since only one needs an echo, turn the software
echo feature off.
C:The remote modem is echoing your typed
characters.
A:Type ATE1 then Enter at the command line. Then
turn off the software echo feature.
Q:No text appears on the screen when in data
mode.
C:The remote modem is not echoing your typed
characters.
A:Type ATE0 then press Enter at the command line.
Then turn the software echo feature on.
C:Your software may not be set to use Full Duplex or
the remote modem may not be set to use Full
Duplex either.
C:The remote modem may be waiting for you to type
a command before it will reply with text.