D-Link DMF-560TX, User Manual

Page: 31 / 52

4 DRIVERS INFORMATION
4-5
4. DRIVERS INFORMATION
4.1. Notes for NDIS Driver
The following are examples of CONFIG.SYS file
and AUTOEXEC.BAT for loading System Soft
Card Services and NDIS2 driver:
Examples of CONFIG.SYS file:
device=c:\cardsoft \ss365sl.exe
device=c:\cardsoft \cs.exe
device=c:\cardsoft \csalloc.exe c:\cardsoft\csalloc.ini
device=c:\lanman.dos\drivers\10/100 Fast
Ethernet\lm28\carden.exe /iop=nnn /irq=n /com=n
/mir=n
device=c:\cardsoft \cardid.exe
device=c:\lanman.dos\deivers\protman.dos /i:c:\lanman.dos
device=c:\lanman.dos\drivers\10/100 Fast
Ethernet\lm28\lmndis.dos
Examples of partial AUTOEXEC.BAT file:
set path= c:\lanman.dos\netprog;%path%
net start workstation
load netbeui
The 10/100 Fast Ethernet function configuration
information for the DOS NDIS driver is contained in
the PROTOCOL.INI file. To make allowances for
passing the requested modem COM port (1,2,3,4) to
the driver, there has been another field added. The
section of the PROTOCOL.INI file that contains
configuration information for this card must begin