D-Link DMF-560TX, User Manual

Page: 28 / 52

4 DRIVERS INFORMATION
3-2
PC Card by your computer are transmitted to the
remote modem rather than being interpreted by the
PC Card as commands.
Using the Windows 95/98 Hyper Terminal Program
To issue an AT command statement, you first need to
run a communication program such as the Microsoft
Windows yper Terminal” program. This program
provides a simple method to manually enter AT
commands so you can do such things as ustomize”
the settings of your 10/100 Fast Et 56K
Fax/Modem PC Card, or store phone numbers you
commonly connect to.
Once the 10/100 Fast Et 56K Fax/Modem
PC Card is connected to your computer serial port
and telephone line, open the Windows 95/98
ccessories” program group, and open the Hyper
Terminal Program. The program will prompt you for
a name and icon to use for your new connection.
Type the name
Test Connection then press <Enter>.
Next, you will be prompted for country information,
area code, phone number, and the device used to
make the connection. For this test purpose, do not
enter a phone number; simply choose the COM port
your 10/100 Fast Et 56K Fax/Modem is
connected to from the onnect Using” list. Click K”
when finished.
The next window sets the COM port settings. The
settings used for the Comet should be as follows:
Bits per second: 115200
Data bits: 8
Parity: None