D-Link DMF-560TX, User Manual

Page: 15 / 52

2 INSTALLATION
2-9
Netware 3.12 and 4.x servers. The frame type set in
NET.CFG must match that set in Netware servers.
3.Using following format to create a startup batch
file
CARDEN /IOP=nnn /IRQ=nnn /COM=n
/MIR=n
LSL ;Link Support Layer Module
;provided by Novell
LM28ODI
;Hardware Specific Module
IPXODI ;IPX Protocol Stack Module
;provided by Novell
NETx
;Shell Support Module provided by
;Novell
LOGIN
2.2.2. MS LAN Manager Installation
1.Cast a look at the README.TXT in the \NDIS2
directory in 10/100 Fast Et 56K
Fax/Modem multifunction PC Card driver disk.
Before installing the drivers, please ensure that the
Microsoft LAN Manager has been installed in the
target path. The installation program will check
and modify the PROTOCOL.INI file for LAN
Manager.
2.Run INSTALL.EXE in the root of driver diskette
(A:\INSTALL).
3.Select Microsoft LAN Manager from the menu
screen.
4.Check the card settings. If current settings are
correct, select Start Installation and go to step 5.
Otherwise, select Modify Parameters to change
settings.