D-Link DKVM-IP8 User Manual Download Page 98

Page: 98 / 104

DKVM-IP8 User Manual

98 / 104

Solaris, Linux Fedora Core 6 and above). Mac OSX

What browsers does DKVM-IP8 support?

The DKVM-IP8 support ( IE7.0 , IE8.0, Netscape7.0, Mozilla 3.2, Firefox 3.6) and above

Does the DKVM-IP8 work with other brand’s KVM switch?

Yes, the DKVM-IP8 can work with most standard KVM.

How many letters the username and password can be set on DKVM-IP8?

The DKVM-IP8 accepts 32 letters of username and password.

How many concurrent user of DKVM-IP8?

The DKVM-IP8 accepts 15 concurrent users.

How many bits of connection encrypted of DKVM-IP8?

The DKVM-IP8 provides AES 256 bits connection encrypted.

Local mouse and remote mouse didn’t sync after doing mouse Intelligent Sync.

Please don’t put window on left-up corner of remote console of DKVM-IP8. Intelligent Sync
has to re-calculate the coordinate of mouse from left-up corner on remote console.

Summary of Contents for DKVM-IP8









































































































Search results

Summary of Contents for DKVM-IP8

Reviews:

Related manuals for DKVM-IP8

Brands by name

Popular brands

D-Link DKVM-IP8, User Manual

Search results

Summary of Contents for DKVM-IP8

Reviews:

Related manuals for DKVM-IP8

Brands by name

Popular brands