DKVM-IP8 User Manual
88 / 104
6.6.7 Date / Time
Figure 6-33. Date / Time
This link refers to a page, where the internal real-time clock of the DKVM-IP8 can be
set up (see Figure 6-33). You have the possibility to adjust the clock manually, or to
use a NTP timeserver. Without a timeserver, your time setting will not be persistent, so
you have to adjust it again, after DKVM-IP8 loses power for more than a few minutes.
To avoid this, you can use a NTP timeserver, which sets up the internal clock
automatically to the current UTC time. Because NTP server time is always UTC, there
is a setting that allows you to set up a static offset to get your local time.
Warning
There is currently no way to adjust the daylight saving time automatically. So
you have to set up the UTC offset twice a year properly to the local rules of
your country.