DKVM-IP8 User Manual
17 / 104
while using remote mass storage control.
12. Connect Ethernet to LAN port and/or modem to serial port, depending on how you want
to access DKVM-IP8 switch
13. Power on the computer.
3.2 Operations
You can control the KVM Switch by three methods:
1. Using push buttons located on the front panel of the KVM Switch
2. Using the OSD (On-Screen Display)
3. Using hotkey commands through the console keyboard
It takes approximately 1-2 seconds for the video signal to refresh after switching servers
and re-synchronization of the mouse and keyboard signals. This is normal operation and
ensures that proper synchronization is performed at the console and the connected
servers.
When you power on KVM Switch, if the security function is enabled (default is disabled), it
will prompt a Login window waiting for you to enter the user name and password. You need
to pass the authentication to control the KVM Switch.
