DKVM-IP8 User Manual
45 / 104
Video Settings through the remote console
Figure 5-10. Video Settings Panel
Brightness
Controls the brightness of the picture
Contrast
Controls the contrast of the picture
Clock
Defines the horizontal frequency for a video line and depends on
the video mode. Different video card types may require different values
here. The default settings in conjuction with the auto adjustment
procedure should be adequate for all common configurations. If the
picture quality is still bad after auto adjustment you may try to change
this setting together with the sampling phase to achieve a better
quality.
Phase
Defines the phase for video sampling, used to control the display
quality together with the setting for sampling clock.
Horizontal Position
Use the left and right buttons to move the picture in
horizontal direction while this option is selected.
Vertical Position
Use the left and right buttons to move the picture in
vertical direction while this option is selected.
Reset this Mode
Reset mode specific settings (Clock , Phase and
Position) to the factory-made defaults.
Reset all Modes
Reset all settings to the factory-made defaults.
Save changes
Save changes permanently
Undo Changes
Restore last settings
• Refresh Video