65
D-Link DIR-890L User Manual
Section 3 - Configuration
Virtual Server
Enter a
Name
for the new rule.
Enter the IP address of the device on your local network that you
want to allow the incoming service to or select the device from the
drop-down menu.
Select the protocol of the traffic to allow or deny (
TCP
,
UDP
,
Both
, or
Other
).
If you selected
Other
, enter the
Protocol Number
.
Enter the public port you want to open.
Enter the private port you want to open.
Use the drop-down menu to select a schedule when the rule will be
enabled. The schedule may be set to
Always Enable
, or create your
own schedule from the
Schedules
section (refer to page 73).
Click
Apply
when you are done.
The DIR-890L can store a maximum of 15 rules. If you wish to remove a rule, click on
its trash can icon in the
Delete
column. If you wish to edit a rule, click on its pencil
icon in the
Edit
column. If you wish to create a new rule, click the
Add Rules
button
.
Click
Save
when you are done.
When you click on
Add Rule
, the
Create New Rule
window will open. Enter the required
information into the fields described below:
Name:
Local IP:
Protocol:
Protocol:
External Port:
Internal Port:
Schedule:
The Virtual Server allows you to specify a single public port for redirection to an internal LAN IP Address and Private LAN port.
From the
Port Forwarding
page click
Virtual Server
.