34
D-Link DIR-890L User Manual
Section 3 - Configuration
Enter the
Username
provided by your ISP.
Enter the
Password
provided by your ISP.
Select either
Always on
,
On demand
, or
Manual
.
Enter a maximum idle time during which the Internet connection
is maintained during inactivity. To disable this feature, enable Auto-
reconnect.
Select
Static IP
if your ISP assigned you the IP address, subnet mask,
gateway, and DNS server addresses. In most cases, select
Dynamic IP
.
Enter the
IP Address
provided by your ISP (Static IP only).
Enter the ISP
Service Name
(optional).
Enter the
Primary DNS Server
IP address assigned by your ISP.
Enter the
Secondary DNS Server
IP address assigned by your ISP.
Maximum Transmission Unit - by default this field will be set to
Auto
.
Select
Manual
if you need to change the MTU for optimal performance
with your ISP.
Click
Save
when you are done.
Username:
Password:
Reconnect
Mode:
Maximum Idle
Time:
Address Mode:
IP Address:
Service Name:
Primary DNS
Server:
Secondary DNS
Server:
MTU:
Select
PPPoE
(Point to Point Protocol over Ethernet) if your Internet connection requires you to enter a username and password. This information
can be provided by your Internet service provider (ISP).
PPPoE
