52
D-Link DIR-890L User Manual
Section 3 - Configuration
Select
Disabled
.
Enable or disable the wireless frequency band.
Create a
Wi-Fi Name
for your wireless network using up to 32 characters.
Create a
Password
to use for wireless security. Wireless clients will need
to enter this password to successfully connect to the network.
Select
None
,
WEP
, or
WPA/WPA2-Personal (
recommended).
Select the preferred wireless networking standard for each band. The
available options will depend on the wireless frequency band, as well
as the currently selected security mode.
Select the desired channel. The default is
Auto
(recommended).
Select the desired wireless transmission power (
High
,
Medium
or
Low
).
Select
Auto 20/40 MHz
if you are using both 802.11n and non-802.11n
wireless devices, or select
20 MHz
if you are not using any 802.11n
wireless clients.
The default setting is
Visible
. Select
Invisible
if you do not want to
broadcast the SSID of your wireless network.
Use the drop-down menu to select a schedule for enabling the rule.
The schedule may be set to
Always Enable
, or you can create your own
schedules in the
Schedules
section (refer to page 73).
Click
Save
when you are done.
Smart Connect:
Status:
Wi-Fi Name (SSID):
Password:
Security Mode:
802.11 Mode:
Wi-Fi Channel:
Transmission
Power:
Channel Width:
Visibility Status:
Schedule:
From the
Settings
menu, click
Wireless
to begin wireless configuration. You will see the
Wi-Fi Name (SSID)
and
Password
for the 2.4GHz and both
5GHz bands. Click
Advanced Settings...
to expand the list and allow you to view all fields corresponding with each frequency band.
2.4GHz
