68
D-Link DIR-890L User Manual
Section 3 - Configuration
Enter a
Name
for the new rule.
This is the IP address of the router used to reach the specified
destination.
Enter the IPv6 address prefix length of the packets that will take this
route.
Enter the gateway address for this rule here.
Enter the metric value for this rule here.
Select the interface that the IP packet must use to transit out of the
router when this route is used.
Click
Apply
when you are done.
Name:
DestNetwork:
PrefixLen:
Gateway:
Metric:
Interface:
IPv6
If you wish to remove a route, click on its trash can icon in the
Delete
column. If you
wish to edit a route click on its pencil icon in the
Edit
column. If you wish to create a
new route, click the
Add Route
button
.
Click
Save
when you are done.
When you click on
Add Route
, the
Create New Route
window will open. Enter the
required information into the fields described below:
To configure IPv6 rules, from the Static Routes page click
IPv6
.
To return to the main IPv4 static routes page, click
IPv4
.
