55
D-Link DIR-890L User Manual
Section 3 - Configuration
Network
Enter the
LAN IP Address
of the router. The default IP address is
192.168.0.1
.
If you change the IP address, once you click
Save
, you will need
to enter the new IP address in your browser to get back into the
configuration utility.
Enter the
Subnet Mask
of the router. The default subnet mask is
255.255.255.0
.
The default address to access the router’s configuration utility is
http://dlinkrouter.local./
You may replace
dlinkrouter
with a name
of your choice by entering it into this field.
Enter the
Local Domain Name
(optional).
If enabled, your computers will use the router for a DNS server.
Disable to transfer the DNS server information from your ISP to your
computers.
Enable or disable the DHCP server.
Enter the starting and ending IP addresses for the DHCP server’s IP
assignment.
Note:
If you statically (manually) assign IP addresses to your computers
or devices, make sure the IP addresses are outside of this range or you
may have an IP conflict.
LAN IP Address:
Subnet Mask:
Management
Link:
Local Domain
Name:
Enable DNS
Relay:
Status:
DHCP IP
Address Range:
This section allows you to change the local network settings of the router and to configure the DHCP (Dynamic Host Control Protocol) settings. You
can enable the use of the DIR-890L as a DNS server. From the
Settings
menu, click
Network
.
Click
Advanced Settings...
to expand the list and see all of the available options.
