Step 2: The default username is Admin (all lower case) and the default password should be
led blank. Click
Login
.
Step 3: Click the Advanced tab at the top of the page and then click Port Forwarding from
the menu on the led-‐hand side.
Step 4: Check the box beside the rule to enable the rule. For pre-‐defined applicaQons, use
the
Applica6on Name
drop-‐down menu and click on the arrow bu=on (
<<
) next to the drop-‐
down menu to auto-‐fill the appropriate field. For non-‐pre-‐defined applicaQons, enter a
Name
for the rule, and enter the port (or range of ports) to open for the
TCP
and
UDP
protocols. If you not wish for the rule to be permanently enabled, you can select a schedule
from the
Schedule
drop-‐down menu. You can also use the
Inbound Filter
drop-‐down menu
to select whether you would like to Accept All or Deny All incoming connecQons on the
specified port(s).
