DIR-620
Wireless N300 Router with 3G/CDMA/LTE Support
and USB Port
User Manual
Configuring via Web-based Interface
On the next page, you can specify an individual name (SSID) and security settings for the router or
disable the router's wireless network broadcast.
Figure 57. The page for changing the settings of the wireless local area network.
If you want to use the router's wireless network to connect devices, leave the
Enable
checkbox
selected. Then, if needed, specify another name for the network in the
SSID
field (use digits and
Latin characters).
It is strongly recommended to configure the secure wireless network of DIR-620. To do this, select
the
Protected
value from the
Network Authentication
drop-down list and enter a key (a
password that will be used to access your wireless network) in the
Network key
field. Use digits
and Latin characters. After applying this setting, the
WPA-PSK/WPA2-PSK mixed
authentication type is specified for the router's WLAN. Click the
Next
button.
On the next page, the parameters of the network to which you want to connect, the entered
password, and the settings of the wireless network of the router are displayed. Make sure that the
specified settings are correct and then click the
Apply
button. After that, the wireless channel of
DIR-620 will switch to the channel of the wireless access point to which you have connected.
After configuring the device as a client, you need to create a WAN connection with relevant
parameters for the
WiFiClient
interface.
After clicking the
Apply
button, the
Home / Information
page opens.
Page
76
of 225
