DIR-620
Wireless N300 Router with 3G/CDMA/LTE Support
and USB Port
User Manual
Configuring via Web-based Interface
In the
Static DHCP
section, you can specify MAC address and IP address pairs (set a fixed IPv4
address in the local area network for a device with a certain MAC address). The router assigns IP
addresses in accordance with the specified pairs only when the DHCP server is enabled (in the
DHCP server
section, in the
Mode
drop-down list, the
Enable
value is selected).
Figure 112. The section for creating MAC-IP pairs.
To create a MAC-IP pair, click the
Add
button. In the
IP
field, enter an IPv4 address which will be
assigned to the device from the LAN, then in the
MAC
field, enter the MAC address of this device.
In the
Host
field, specify a network name of the device for easier identification (
optional
).
Also you can create a MAC-IP pair for a device connected to the router's LAN at the moment. To do
this, select the relevant value from the
Known IP/MAC
addresses
drop-down list (the
IP
and
MAC
fields will be filled in automatically).
When all needed MAC-IP pairs are specified, click the
Apply
button.
Existing MAC-IP pairs are displayed in the table of the
Static DHCP
section. To remove a pair,
select the checkbox in the relevant line in the table and click the
Remove
button. Then click the
Apply
button.
Page
134
of 225
