D-Link DIR-620 User Manual Download Page 131

Page: 131 / 225

DIR-620

Wireless N300 Router with 3G/CDMA/LTE Support

and USB Port

User Manual

Configuring via Web-based Interface

LAN

To configure the router's local interface, proceed to the

Net / LAN

page.

Figure 109. Basic settings of the local interface.

If needed, edit the basic settings of the local interface.

Parameter

Description

IP Address

The IP address of the router in the local subnet. By default, the
following value is specified:

192.168.0.1

Netmask

The mask of the local subnet. By default, the following value is
specified:

255.255.255.0

IPv6 address

The IPv6 address of the router in the local subnet. By default, the
following value is specified:

fd01::1/64

. The field is available

for editing, if the

DHCP PD

checkbox is not selected.

When needed settings are configured, click the

Apply

button.

In the

DHCP server

section, you can configure the built-in DHCP server of the router.

Figure 110. The section for configuring the DHCP server.

Page

131

of 225

Summary of Contents for DIR-620


































































































































































































































Search results

Summary of Contents for DIR-620

Reviews:

Related manuals for DIR-620

Brands by name

Popular brands

D-Link DIR-620, User Manual

Search results

Summary of Contents for DIR-620

Reviews:

Related manuals for DIR-620

Brands by name

Popular brands