D-Link DIR-620 User Manual Download Page 65

Page: 65 / 225

DIR-620

Wireless N300 Router with 3G/CDMA/LTE Support

and USB Port

User Manual

Configuring via Web-based Interface

Checking Internet Availability

On the page, you can check the WAN connection you have created.

Figure 46. Checking the Internet availability.

In the

Result

section, the status of the WAN connection and possible causes of malfunctions are

displayed. To recheck the status of the WAN connection, enter the IP address or name of a host in
the

Address

field or leave the value specified by default (

google.com

). Then click the

Recheck

button.

Click the

Back

button to specify other settings.

Click the

Next

button to continue.

After clicking the

Next

button, the page for configuring the Yandex.DNS service opens (see the

Configuring Yandex.DNS Service

section, page 66).

Page

of 225

Summary of Contents for DIR-620


































































































































































































































Search results

Summary of Contents for DIR-620

Reviews:

Related manuals for DIR-620

Brands by name

Popular brands

D-Link DIR-620, User Manual

Search results

Summary of Contents for DIR-620

Reviews:

Related manuals for DIR-620

Brands by name

Popular brands