DIR-620
Wireless N300 Router with 3G/CDMA/LTE Support
and USB Port
User Manual
Configuring via Web-based Interface
Telnet
On the
System / Telnet
page, you can enable or disable access to the device settings via TELNET
from your LAN. By default, access is enabled.
Figure 168. The
System / Telnet
page.
To disable access via TELNET, deselect the
On
checkbox and click the
Apply
button.
To enable access via TELNET again, select the
On
checkbox. In the
Port
field, enter the number of
the router's port through which access will be allowed (by default, the port
23
is specified). Then
click the
Apply
button.
Page
217
of 225
