DIR-430 RangeBooster G Wireless Router User’s Guide
Version : 1
.0
ȱ
W
ck on
Setup
hyperlink in the top panel, and then
ireless
The DIR-430 can act as a wireless access point for wireless clients (PCs or laptops
with wireless network cards). The image below shows the wireless network
settings page. To access it, cli
click the
Wireless
hyperlink.
Server Set Identifier (SSID):
This is a string that will identify the service set
started by this Gateway or other way called as wireless Access Point. All wireless
client stations that wish to associate with this Access Point have to use the SSID
that is configured here. The SSID will be a unique identifier for the wireless
network.
ȱ
ique-not something easily guessed. Also
be displayed the channels allowed in
channel with the least amount of interference every time
8G wireless
clients to maximize their Wi-Fi link when extra bandwidth is needed.
It is advised to change the SSID name from the default to any other SSID to
avoid security problems. Attackers can use this default SSID to attempt to
penetrate. Use SSID something un
advised to change SSID periodically.
ȱ
Wireless mode:
Describes the wireless mode of operation, and their capabilities
that used at Access Point, which will be one of 802.11b or 802.11 g based on the
card that is attached internally on your board.
Channel:
Select channel to be used for the wireless network to communicate.
The available channels supported by the wireless products in various countries are
different. For example, Channels 1 to 11 are supported in the U.S. and Canada,
and Channels 1 to 13 are supported in Europe and Australia. Based on the region
in which the DIR-430 was purchased you will
that area in the drop-down menu.
Enable Auto Channel Scan:
The DIR-430 can be configured to automatically
select the best wireless channel on start-up. The DIR-430 will scan all available
channels and choose the
the router is rebooted.
Super G Mode:
The DIR-430 supports D-Link’s 108G Wireless mode for High-
speed wireless client connections. To fully realize the performance potential of
the included Super G modes it is necessary to have a D-Link 108G wireless client
on the laptop or PC connecting to the DIR-430. Super G without Turbo will
enable non-108G wireless clients to connect to the DIR-430 and see performance
improvements. Super G with Dynamic Turbo will enable D-Link 10
Page
ȱ
32
ȱ
of
ȱ
103
ȱ
