DIR-430 RangeBooster G Wireless Router User’s Guide
Version : 1
.0
ȱ
P
our ISP connection. Prioritization may be enabled or disabled on the WAN page.
M
-430. This allows the DIR-430
rioritization
Prioritization will streamline traffic bound for the Internet based on configurations
made in the Network Filter Section (within the Advanced Configuration Menu). In
order for Prioritization to work properly you must know the Uplink Bandwidth of
y
AC cloning settings
Some times, the Internet Service provider requires your PC and its hardware
address to be registered with their network. Typically, they provide with an
installation CD with software to be installed on your PC. ISP once registers the
MAC address, allows the Internet access only to the computer with the hardware
address (MAC) it registered. To make ISP transparent about your DIR-430, you
have to clone your PC's MAC address on to your DIR
to use cloned MAC address to communicate to ISP.
I
n in below. DHCP is the default protocol
nternet Connection Settings
The DIR-430 allows you to access the Internet in four different ways: DHCP,
Static IP, PPPoE, PPTP protocols as show
for the DIR-430 to access the Internet.
Connectivity to the Internet may be disabled on the WAN page (if connected).
Page
ȱ
25
ȱ
of
ȱ
103
ȱ
