DIR-430 RangeBooster G Wireless Router User’s Guide
Version : 1
.0
ȱ
D
t disturb the
HCP client
If the option selected is DHCP client, the DIR-430 tries to get the IP address
automatically from the Internet. This requires a DHCP Server running on the
network connected to your Internet Port. You should no
configuration while the progress bar is displayed on your browser.
ed Configuration
section in this document for custom control
ML
plays IP address information as shown in the following image.
us
button and try again, or change the mode of the
Once successful, your quick setup is complete. You are ready to use the Gateway.
Proceed to
Advanc
over the Gateway.
Once DHCP client successfully receives the IP address from the ISP, the HT
configuration dis
Insert pic here
In case the Gateway fails to get an IP address, it shows an error on the screen.
You may press
<Previo
Internet access setting.
ȱ
ng is disabled by default. Please see Section on MAC cloning if
required.
MAC cloni
After the DIR-430 gets the new IP information, you are allowed to change ISP
served DNS server IP addresses at any time by clicking
here
hyper-link. Once you
click on the hyper-link, it is prompted to enter new DNS server IP address as
shown below.
u add custom DNS servers, or if ISP doesn’t not provide DNS
ormation.
This facility helps yo
server inf
Page
ȱ
26
ȱ
of
ȱ
103
ȱ
