D-Link DGS-3100-48 Page 35 User Manual Download

Page: 35 / 293

DGS-3100 Series Gigabit Stackable Managed Switch User Manual

Defining IP Addresses

The

IP Address Page

contains fields for assigning IP addresses. Packets are forwarded to the default IP when frames are

sent to a remote network via the

Default Gateway

. The configured IP address must belong to the same IP address subnet of

one of the IP interfaces. The

Dynamic Host Configuration Protocol

(DHCP) assigns dynamic IP addresses to devices on a

network. DHCP ensures that network devices can have a different IP address every time the device connects to the network.

Click

Configuration > IP Address.

The

IP Address Page

opens:

Figure 0-3. IP Address Page

The IP Address Page contains the following fields:

Field

Description

Static

When selected, the IP address is static and user-defined in the

IP Address

field. This is the

default value.

DHCP

When selected, the IP address is retrieved from a DHCP server.

IP Address

Defines the IP address. This field is active if the IP address is static.

Subnet Mask

Defines the address mask that manages sub-netting on the network. The default value is
255.0.0.0.

Gateway

Defines the default gateway. The default gateway manages connections to other subnets
and other networks.

Management VLAN VID

Defines the management VLAN’s VID.

Select the IP address type in either the Static or DHCP fields.

Static

is the defined IP address type, define the

IP Address

field.

Define the

Subnet Mask

Gateway

, and

Management VLAN VID

fields.

Click

. The IP address information is defined, and the device is updated.

Summary of Contents for DGS-3100-48






































































































































































































































































































Search results

Summary of Contents for DGS-3100-48

Reviews:

Related manuals for DGS-3100-48

Brands by name

Popular brands

D-Link DGS-3100-48, User Manual

Search results

Summary of Contents for DGS-3100-48

Reviews:

Related manuals for DGS-3100-48

Brands by name

Popular brands