manualshive.com logo in svg

D-Link DGS-3100-48, User Manual

The D-Link DGS-3100-48 is a high-performance switch designed for seamless network connectivity. With its durable construction and advanced features, this product ensures reliable and efficient networking. To get started, download the free user manual from manualshive.com to unleash the full potential of your device.

Share
Download
background image

DGS-3100 Series Gigabit Stackable Managed Switch User Manual 

Dual Image Services 

The device contains two software images in its flash memory, one is for reboot and the other one is for backup. When a 
software download is successfully completed, the new image automatically becomes the new reboot file, unless the user 
manually configures the other file to be active. In a stacked system, the user can define the active image file for every unit in 
the stack. 
When the user is downloading a new image, it will always be downloaded to the location of the second image. It means that 
if image1 is the currently running image, the new firmware will be always downloaded as image2, nothing else will 
happened untill the next reboot. 
By default, the newly downloaded image will be marked as the next image which will run after the reboot. However, the 
user can identify the next image which will run after reboot by viewing the page: ‘Dual Image Services/Firmware 
Information’ and change the next image that will run after reboot if user config the page: ‘Dual Image Services/Config 
Firmware Image’. 
This feature includes two screens: 

59 

onfig Firmware Image 

Firmware Information  

n its flash memory, one is for bootup and the other one is for backup. When a 

it will always be downloaded to the location of the non-active image. It means 

r the device, or in case of a stacked 

formation

. The 

Firmware Information Page

 opens: 

•

 

Firmware InformationC

The device contains two software images i
software download is successfully completed, the new image automatically becomes the active image after the reboot. The 
user can also manually configure the other file to be the bootup image instead. In a stacked system, the user can define the 
bootup image file for every unit in the stack. 
When the user is downloading a new image, 
that if image1 is the currently active image, the new firmware will be always downloaded as image2. 
The user can also delete an image, however only the non-active image can be deleted. 
The 

Firmware Information Page

 contains information about the image files stored fo

system, for all devices in the stack. To view the list of device images: 

•

 

Click 

Configuration > Dual Image Services > Firmware In

 

Figure 0-21. Firmware Information Page 

The 

Firmware Information Page

 contains the following fields: 

Summary of Contents for DGS-3100-48






































































































































































































































































































Reviews:

No comments

Related manuals for DGS-3100-48

D-Link DSS-16+ Reference Manual preview
DSS-16+
Brand: D-Link Pages: 2
Balluff BNI IOL-727-S51-P012 Assembly Instructions Manual preview
BNI IOL-727-S51-P012
Brand: Balluff Pages: 20
IBM 8265 Site Preparation Manual preview
8265
Brand: IBM Pages: 164
IBM 8265 Nways ATM Switch Problem Determination And Service Manual preview
8265 Nways ATM Switch
Brand: IBM Pages: 174
JB Systems Light SW-416 Operation Manual preview
SW-416
Brand: JB Systems Light Pages: 15
Kramer VS-421 User Manual preview
VS-421
Brand: Kramer Pages: 8
QCT QuantaMesh T1048-LB9 Installation Manual preview
QuantaMesh T1048-LB9
Brand: QCT Pages: 42
Extron electronics MSW 4SV rs Specifications preview
MSW 4SV rs
Brand: Extron electronics Pages: 2
Westell A99-BAI-ACSF-UGKIT Install Instructions preview
A99-BAI-ACSF-UGKIT
Brand: Westell Pages: 3
UNICOM SmartGST-2600M Specifications preview
SmartGST-2600M
Brand: UNICOM Pages: 1
G&D DL-DVI-MUX2-NT SERIES Installation And Operation Manual preview
DL-DVI-MUX2-NT SERIES
Brand: G&D Pages: 76
E&C ITS 3000 Installation And Operation Manual preview
ITS 3000
Brand: E&C Pages: 10
PNI CT25WIFI User Manual preview
CT25WIFI
Brand: PNI Pages: 92
A-Neuvideo ANI-MINI601HD Instruction Manual preview
ANI-MINI601HD
Brand: A-Neuvideo Pages: 15
M-E CUVEO CT-W2 Manual preview
CUVEO CT-W2
Brand: M-E Pages: 36
Kramer VP-26 User Manual preview
VP-26
Brand: Kramer Pages: 46
Lantech IPES/IES-5416T Series User Manual preview
IPES/IES-5416T Series
Brand: Lantech Pages: 27
Xcellon SH10-10H Manual preview
SH10-10H
Brand: Xcellon Pages: 2

Brands by name

Popular brands

Load more brands